power dividers

Coaxial Power Dividers in the Low VHF band from 54-88 MHz

Low VHF power dividers are tuned on a per channel basis. The following table shows the standard models available. Custom models are also available if you have a non-standard application.

Connector interfaces are flexible based on insertion power. Divisional ports on standard models are equal in phase and amplitude.

Frequency Range: 54-88 MHz
Impedance: 50 ohms
Insertion Loss: <0.1 dB
Power Split Ratio
2-Way: 50% x 2
3-Way: 33.3% x 3
4-Way: 25% x 4
5-Way: 20% x 5
6-Way: 16.6% x 6
8-Way: 12.5% x 8
VSWR: <1.05 per 6 MHz
Phase: 0 Degrees on O/P ports
Max CW Common Connector
1 kW: N female
5 kW: 7/8 EIA
15 kW: 1-5/8 EIA
DC Continuity: Continuity all ports
Outer Conductor: C272 Brass
Inner Conductor: 6082/6061 Aluminum
Mounting: Stainless Steel clamps available

Specifications are subject to change without notice.