Coaxial Power Dividers in the VHF Radio band from 108-174 MHz
VHF power dividers are tuned on a per channel basis or can be tuned across the entire band depending on VSWR specifications. The following table shows the standard models available. Custom models are also available if you have a non-standard application.
Connector interfaces are flexible based on insertion power. Divisional ports on standard models are equal in phase and amplitude.
VHF power dividers are tuned on a per channel basis or can be tuned across the entire band depending on VSWR specifications. The following table shows the standard models available. Custom models are also available if you have a non-standard application.
Connector interfaces are flexible based on insertion power. Divisional ports on standard models are equal in phase and amplitude.
| Frequency Range: | 108-174 MHz |
| Impedance: | 50 ohms |
| Insertion Loss: | <0.1 dB |
| Power Split Ratio | |
| 2-Way: | 50% x 2 |
| 3-Way: | 33.3% x 3 |
| 4-Way: | 25% x 4 |
| 5-Way: | 20% x 5 |
| 6-Way: | 16.6% x 6 |
| 8-Way: | 12.5% x 8 |
| VSWR: | <1.02 per 2 MHz |
| <1.05 per 15 MHz | |
| <1.10 per 30 MHz | |
| <1.05 108-174 MHz upon request | |
| Phase: | 0 Degrees on O/P ports |
| Max CW | Common Connector |
| 1 kW: | N female |
| 3 kW: | 7-16 female |
| 5 kW: | 7/8 EIA |
| DC Continuity: | Continuity all ports |
| Material | |
| Outer Conductor: | C272 Brass |
| Inner Conductor: | 6082/6061 Aluminum |
| Mounting: | Stainless Steel clamps available |
Specifications are subject to change without notice.