Coaxial Power Dividers in the High VHF band from 174-230 MHz
High VHF power dividers are tuned on a per channel basis or can be tuned across the entire band depending on VSWR specifications. The following table shows the standard models available. Custom models are also available if you have a non-standard application.
Connector interfaces are flexible based on insertion power. Divisional ports on standard models are equal in phase and amplitude.
High VHF power dividers are tuned on a per channel basis or can be tuned across the entire band depending on VSWR specifications. The following table shows the standard models available. Custom models are also available if you have a non-standard application.
Connector interfaces are flexible based on insertion power. Divisional ports on standard models are equal in phase and amplitude.
| Frequency Range: | 174-230 MHz |
| Impedance: | 50 ohms |
| Insertion Loss: | <0.1 dB |
| Power Split Ratio | |
| 2-Way: | 50% x 2 |
| 3-Way: | 33.3% x 3 |
| 4-Way: | 25% x 4 |
| 5-Way: | 20% x 5 |
| 6-Way: | 16.6% x 6 |
| 8-Way: | 12.5% x 8 |
| VSWR: | <1.05 per 6 MHz |
| <1.10 per 20 MHz | |
| <1.05 174-230 MHz upon request | |
| Phase: | 0 Degrees on O/P ports |
| Max CW | Common Connector |
| 0.75 kW: | N female |
| 3 kW: | 7-16 female |
| 5 kW: | 7/8 EIA |
| 8 kW: | 1-5/8 EIA |
| DC Continuity: | Continuity all ports |
| Material | |
| Outer Conductor: | C272 Brass |
| Inner Conductor: | 6082/6061 Aluminum |
| Mounting: | Stainless Steel clamps available |
Specifications are subject to change without notice.