Coaxial Power Dividers in the 1 GHz band from 960-1400 MHz
1 GHz power dividers are tuned across the entire band depending on VSWR specifications. The following table shows the standard models available with custom models also available if you have a non-standard application.
Connector interfaces are flexible based on insertion power. Divisional ports on standard models are equal in phase and amplitude.
1 GHz power dividers are tuned across the entire band depending on VSWR specifications. The following table shows the standard models available with custom models also available if you have a non-standard application.
Connector interfaces are flexible based on insertion power. Divisional ports on standard models are equal in phase and amplitude.
| Frequency Range: | 960-1400 MHz |
| Impedance: | 50 ohms |
| Insertion Loss: | <0.1 dB |
| Power Split Ratio | |
| 2-Way: | 50% x 2 |
| 3-Way: | 33.3% x 3 |
| 4-Way: | 25% x 4 |
| 5-Way: | 20% x 5 |
| 6-Way: | 16.6% x 6 |
| 8-Way: | 12.5% x 8 |
| VSWR: | <1.05 per 60 MHz |
| <1.10 entire band | |
| Phase: | 0 Degrees on O/P ports |
| Max CW | Common Connector |
| 0.25 kW: | N female |
| 1.5 kW: | 7-16 female |
| 2.5 kW: | 7/8 EIA |
| DC Continuity: | Continuity all ports |
| Material | |
| Outer Conductor: | C272 Brass |
| Inner Conductor: | 6082/6061 Aluminum |
| Mounting: | Stainless Steel clamps available |
Specifications are subject to change without notice.