780-444-6767

Coaxial Power Dividers in the UHF band from 470-700 MHz

UHF power dividers are tuned on a per channel basis or can be tuned across the entire band depending on VSWR specifications. The following table shows the standard models available. Custom models are also available if you have a non-standard application.

Connector interfaces are flexible based on insertion power. Divisional ports on standard models are equal in phase and amplitude.


UHF power dividers are tuned on a per channel basis or can be tuned across the entire band depending on VSWR specifications. The following table shows the standard models available. Custom models are also available if you have a non-standard application.

Connector interfaces are flexible based on insertion power. Divisional ports on standard models are equal in phase and amplitude.

Frequency Range: 470-700 MHz
Impedance: 50 ohms
Insertion Loss: <0.1 dB
Power Split Ratio
2-Way: 50% x 2
3-Way: 33.3% x 3
4-Way: 25% x 4
5-Way: 20% x 5
6-Way: 16.6% x 6
8-Way: 12.5% x 8
VSWR: <1.05 per 10 MHz
  <1.10 entire band
Phase: 0 Degrees on O/P ports
Max CW Common Connector
0.5 kW: N female
2 kW: 7-16 female
4 kW: 7/8 EIA
DC Continuity: Continuity all ports
Material  
Outer Conductor: C272 Brass
Inner Conductor: 6082/6061 Aluminum
Mounting: HDG clamps available
   

Specifications are subject to change without notice.