780-444-6767

Coaxial Power Dividers in the High VHF band from 174-230 MHz

High VHF power dividers are tuned on a per channel basis or can be tuned across the entire band depending on VSWR specifications. The following table shows the standard models available. Custom models are also available if you have a non-standard application.

Connector interfaces are flexible based on insertion power. Divisional ports on standard models are equal in phase and amplitude.


High VHF power dividers are tuned on a per channel basis or can be tuned across the entire band depending on VSWR specifications. The following table shows the standard models available. Custom models are also available if you have a non-standard application.

Connector interfaces are flexible based on insertion power. Divisional ports on standard models are equal in phase and amplitude.

Frequency Range: 174-230 MHz
Impedance: 50 ohms
Insertion Loss: <0.1 dB
Power Split Ratio
2-Way: 50% x 2
3-Way: 33.3% x 3
4-Way: 25% x 4
5-Way: 20% x 5
6-Way: 16.6% x 6
8-Way: 12.5% x 8
VSWR: <1.05 per 6 MHz
  <1.10 per 20 MHz
  <1.30 per 50 MHz
Phase: 0 Degrees on O/P ports
Max CW Common Connector
0.75 kW: N female
3 kW: 7-16 female
5 kW: 7/8 EIA
8 kW: 1-5/8 EIA
DC Continuity: Continuity all ports
Material  
Outer Conductor: C272 Brass
Inner Conductor: 6082/6061 Aluminum
Mounting: HDG clamps available
   

Specifications are subject to change without notice.